top of page
®

ROBOTICALLY WELDED CONCRETE ANCHORS

STURDI-WALL

PRODUCED IN INDIANA
192266-200.png

The Sturdi-Wall® system allows for post-frame construction on traditional concrete foundations. ICC-ES certified Sturdi-Wall® Plus anchor brackets are constructed of 100% American-made 1/4" steel, robotically welded, and finished with a tough powder coat. Provides the highest ultimate strength connection to your foundation but requires installation while concrete is still wet. HIGHLIGHTS: epoxy-shield proprietary powder coating (rated 2000+ salt spray hours), robotically welded HSLA steel bracket, A706 rebar anchors.

STURDI-WALL® PLUS | WET SET ANCHORS

EPOXI-SHIELD PROPRIETARY POWDER COAT EXCEED 2,000 SALT SPRAY HOURS

SWP66-600x497_edited.png

1/4" ROBOTICALLY WELDED, HSLA

STEEL BRACKET

PRE-WELDED 18"

A706 REBAR

image%20(1)_edited.png

1/4" ROBOTICALLY WELDED, HSLA

STEEL BRACKET

EPOXI-SHIELD PROPRIETARY POWDER COAT EXCEED 2,000 SALT SPRAY HOURS

SLOTTED 1/4" STEEL BASE

STURDI-WALL® | DRILL SET ANCHORS

The Sturdi-Wall® system allows for post-frame construction on traditional concrete foundations. ICC-ES certified Sturdi-Wall® Plus anchor brackets are constructed of 100% American-made 1/4" steel, robotically welded, and finished with a tough powder coat. Sturdi-Wall Drill Set provides ultimate strength connection to your foundation and is installed on set concrete.

HIGHLIGHTS: epoxy-shield proprietary powder coating (rated 2000+ salt spray hours), robotically welded HSLA steel bracket, slotted steel base.

 

Tools required: hammer drill with masonry bit, concrete fasteners. Two other fastener options are epoxy anchors and expansion anchors (must be purchased through local supplier).

STURDI-WALL®
Installation Guide
perma-column-installation-guide-1.jpg
STURDI-WALL®
ICC Evaluation Report
ICC_Cover.PNG
STURDI-WALL®
Brochure
Sturdi-Wall-post-frame-anchor-brackets-1.jpg
STURDI-WALL®
Design and Use Guide
sw_cover.PNG
bottom of page